|Working Space Area:||290mm - 440mm.|
|Voltage||220v to 420v|
|Product type||Vacuum Leak Tester|
Presto introduces the very useful and upgraded model of Vacuum Leak Tester LCD display with thermal printer keeping in mind the standards that are provided by standardization authorities. It is used for the visual inspection when the seal integrity of the foiled cups is tested by offering the sample under the specific amount of vacuum. The defined amount of vacuum is generated in the chamber to measure the integrity of the samples and to calculate the leakage of the foiled cups to measure the intact strength of the seals. It is the last test which is performed on the materials before warehousing and storage.
· Profile: 20 profile Programming with 4 parameters namely test name, program number, hold time, set vacuum
Key features of the machine:
· Running timer
· RTC (Real-time clock)
· Parameter selection short key.-F1, F2, F3.
· The alphanumeric keypad on the front panel.
· Timer Range: mm: ss
· Protection: Password protected device
· Desiccator chamber size: 300 mm diameter (As per test sample)
· Vacuum display resolution: 1 mmHg
· Initial delay timer: Range settable 40 -300 sec.
· Range of device: 150 mmHg to -600mmHg
· Power supply: 220 V, AC Single phase.
· Outer body: Mild steel powder coated.
· Fully micro-controlled operation.
· Simultaneous display vacuum on the screen.
· Graphical LCD digital display.
· Automatic release of vacuum from desiccator on the completion of the test procedure.
· Vacuum maintenance time: From 0-999 seconds.
· Vacuum and Time can be programmed.
· "Set" the vacuum pressure and countdown for "Hold Time."
· Built in portable and oil free vacuum pump