Mode No: A-DTTM250
|
Suitable for:
Seal Strength / Breaking strength
Pull out strength / Yield point
Tearing test
Elongation measurement
Rupture point
Peeling test
Bond strength
Digital Tensile Strength Tester for plastic, rubber & metal is
based on the Constant Rate of Traverse (CRT) principle. The sample
is held between two jaws, the upper one is a stationary jaw while
the other end is made to move at a known fixed speed with the help
of Motor, Gear Box and Lead Screw arrangement (75mm or 300mm per
minute). The load exerted on the Stationary jaw is sensed by a
sensor connected with load cell, which directly indicates the load
in Digital form in kgs. The Elongation is digitally displayed.
Technical Specifications
| Capacity of the Tester |
0 -250Kg./ 0-25N |
| Sensitivity |
100 Gms. |
| Speed of Machine |
75 mm per. Minute, 300 mm per. Minute |
| Minimum jaw separation |
25 mm |
| Maximum jaw separation |
750 mm |
| Motor |
¼ HP Single Phase 220 1110 V AC Supply |
| Power Consumption |
1 KW |
Related Standards
BS 1610, BSES 1002-3, ASTM E-4, DIN 5122/1.
|