Computer Based Tensile Testing Machine - Zeus Ultimo
Capacity : 250 Kgf; Least Count :100 gm
Type : Floor standing; C.R.E. Type.
Grip to Grip Separation : Minimum 25mm and Maximum 700mm. Two sets supplied with the machine.
Cross Head Speed : 50mm - 500mm / min. With Servo Motor Variable Speed.
Speed Control : Through Graphic user interface PC. Cross Head Travel Length : Overall travel length 800mm without Grips.
Load Sensor : Universal 'S' Type / Pancake Type.
Load Sensor Accuracy : +0.5% of the Load Cell capacity. Calibrated by NPL approved proving ring dynamometers.
Load Sensor Sensing : Auto - detect / sensing through advance electronics. Electronic Auto-Zero
Over Load /Travel Safety : Auto stop through software : 10% above load cell capacity/ Built in
Systems Controls : Advance Micro - controller systems

Capacity Available

Used to check the Physical Strength of Paper Cardboard, Rexine, Jute and Paper Board etc.

Features:

• Capacity 20 kg Least Count 2gm
• Bright LED Digital Display.
• Variable Speed.
• Peak Hold Facility.
• Imported Ball Screw driven for best results.
• Very Accurate.

It is based on the Constant Rate of Traverse (CRT) principle. The sample is held between two jaws; the upper one is a stationary jaw while the other end is made to move at a known fixed speed with the help of Motor, Gear Box and Lead Screw arrangement (100mm or 300mm per minute). The load exerted on the Stationary jaw is sensed by a sensor connected with load cell which directly indicates the load in Digital form in kg.

Technical Specifications:

• Other Ranges also available

Bursting Strength Tester - Analouge Bursting Strength is a reliable index of the strength and performance of materials like paper, paper boards, corrugated boards and boxes, solid fibreboards, filter cloth, industrial fabric, leather, Rexine, etc.

Bursting Strength Tester is ideal for testing a wide range of materials to determine their quality, strength and performance

Bursting Strength Tester is easy to operate. It is scientifically calibrated for reliability. It is widely used by industries and institutions and stands out as a proven and reliable equipment.

Two- in-One:
Fitted with special rubber diaphragms, for testing materials with lower as well as higher test values accurately. ( Ranges 0-7 and 0-35 Kg/cm2)

One of the most common measure of the quality of a fabric is the number of threads per unit length in both the warp and weft directions. In this apparatus a motorised travelling microscope is used for viewing the weave of the fabric under test. Openings of known widths are provided to enable picks and ends per unit length to be determined both in Metric and Imperial Systems. The base of the apparatus is meticulously finished in Metallic Blue Paint and all other parts are made of Stainless Steel for trouble free life long operations

ISO 7211, BSEN 1049, ASTM D3775, IWTO 39-87

Every Textile material irrespective of their form (i.e., Fiber, Yarn, Fabric) contain water, which is expressed in terms of moisture percentage. Wool has got the highest moisture content and synthetic fibers contains the lowest moisture content. Digital Moisture Meter measures moisture by sensing the electrical resistance of the hygroscopic material. The sensing can be done with one of the three type of electrodes. The section of sensor depends upon the form of the material. Pin type sensors can be used for loose cotton materials cones, cheese. Flat type of sensors can be used for fabric for web. Rollers can be used for fabric or yarn or web running on the machine. The long electrodes are made specially for cotton bales or such application. The instrument can operate either on 230 VAC mains or battery. Pin Type Sensor (Small Pins): It is used for loose Cotton Cones, Pin Type Sensor (Long Pins): The Sensor with long Pins is used for Cotton Bales. Flat Type Sensor: It is used for fabrics, garments etc.

Roller Type Sensor : It is used for fabric in running condition.